84silverado
Senior Member
Offline
Posts: 334
Altus, Ok.
Gender:
|
here is a basic rundown of the motor going into the nova, maybe chris can give us an estimate of what this thing might run in the 1/8th lol
350-2 bolt main, stock crank, stock (x) rods, hyper. speed pro 10:1 pistons, comp cams xe284 .507/.510 lift, 1.6 roller rockers makes total lift of cam a little above .540, 882 heads w/ dbl spring valve springs that match cam, screw in studs, guide plates, and opened up a little on the exhaust side, weiand 7546 open plenum intake, gear drive (noisy o yeah), hly 750, 1-5/8 primary 3in. collector headers.......
now the driveline...
8.5in. 10 bolt rear with richmond mini spool and 4.56 gears, th350 basic b&m internals and transpack, hughes 10in. 3000 stall converter
... and one more picture lets see who is first to notice why i posted this pic??? (hint: check the #) im new to this engine building stuff just thought this was pretty weird
|